Ipruleset; Iprule - D-Link NetDefend DFL-210 Cli Reference Manual

3.32. IPRuleSet

3.32. IPRuleSet
Description
An IP Rule Set is a self-contained set of IP Rules. Default action is Drop.
Properties
Name
Comments

3.32.1. IPRule

Description
An IP rule specifies what action to perform on network traffic that matches the specified filter criter-
ia.
Properties
Name
Action
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
NATAction
NATSenderAddress
NATPool
SATTranslate
SATTranslateToIP
A name to uniquely identify this IPRuleSet. (Identifier)
Text describing the current object. (Optional)
Specifies a symbolic name for the rule. (Optional)
Reject, Drop, FwdFast, Allow, NAT, SAT ,SLB_SAT,
GOTO or RETURN.
Specifies the name of the receiving interface to be compared
to the received packet.
Specifies the sender span of IP addresses to be compared to
the received packet.
Specifies the the destination interface to be compared to the
received packet.
Specifies the span of IP addresses to be compared to the des-
tination IP of the received packet.
Specifies a service that will be used as a filter parameter when
matching traffic with this rule.
By adding a schedule to a rule, the security gateway will only
allow that rule to trigger at those designated times. (Optional)
Specify sender address or Use interface address. (Default:
UseInterfaceAddress)
Specifies which sender address will be used.
Specifies which sender address will be used.
Specifies whether to translate source IP or destination IP.
(Default: DestinationIP)
Translate to this IP address.
Chapter 3. Configuration Reference
146