Performing A Factory Reset - D-Link DI-804 User Manual

Performing a Factory Reset

Follow these steps to perform a Factory Reset using the Reset button on
the back of the DI-804.
1. With the unit off, press and hold the Reset button with a pen or
paper clip and turn the unit on.
2. Hold the reset button for about 5 or 6 seconds until the Power/Test
LED on the front panel blinks very quickly and then release.
3. Wait a few seconds for the Broadband Router to reboot using
default settings.
A Factory Reset can also be performed through the web configuration
interface. Follow these steps to perform a factory reset using the web
configuration interface.
1. Log- in to the DI-804 web configuration interface.
2. Click on the System Management link at the bottom of the screen.
3. Click on Restore Default Settings.
4. You will be asked if you want to restore to default settings. Click
OK to restore settings to default configuration or click Cancel.
57