D-Link DI-804 User Manual page 28

You can enter a comment in the Comment field to help recognize this
index. To configure certain ports to be redirected, you must configure the
Internet Port, Local Port, Protocol and Local Computer fields. The Internet
Port is the port on the Internet that the application will use to communicate
with your computer. The Local Port is the port that you would like the
Internet port to use on your LAN side. The Protocol drop down box enables
you to choose TCP, UDP, or –. – means that the router will not care if it is
TCP or UDP. It will lose efficacy protocol.
Only one computer on your LAN can use each Index. You can choose
which computer you want to use by entering the IP Address of that computer
in the Local Computer field or click the Choose PC button and click on the
IP Address.
Click the Clear button to clear your changes. Or you can click the
Cancel button to cancel your changes.
28