Sign in today to find solutions:

Don't have an account? Sign up

D-link DI-804 Quick Install Manual

D-link di-804 network-hub: install guide.

 
1 1
Connecting the DI-804 Broadband Router
Connecting the DI-804 Broadband Router
to your network
to your network
When you have completed the steps in this installation guide, your connected
First,
Plug in the power supply as shown.
The Power LED will turn on
to indicate proper operation.
DI-804..03.08.01
network may look someting like this:
Analog Modem
DFE-670TXD
DFE-530TX+
Quick Install Guide
Quick Install Guide
WAN port
LAN ports
DI-804
DI-804
Broadband Router
Internet
Cable/DSL
Modem
Next page ->

Summary of Contents

  • Page 1

    Quick Install Guide Quick Install Guide DI-804 Broadband Router Connecting the DI-804 Broadband Router Connecting the DI-804 Broadband Router to your network to your network When you have completed the steps in this installation guide, your connected network may look someting like this:...

  • Page 2

    Next, connect the WAN port to the Cable/DSL modem. The WAN LED will indicate connection. Finally, connect the computer to one of the LAN ports on the DI-804. Installing the DI-804 using the Setup Installing the DI-804 using the Setup Wizard...

  • Page 3

    Installing the DI-804 using the Setup Installing the DI-804 using the Setup Wizard Wizard continued continued Open the web browser, and type 192.168.0.1 into the URL address box. Note: Please disable any proxy server setting for the web browser. Click on “Start the Setup Wizard”...

  • Page 4

    Installing the DI-804 using the Setup Installing the DI-804 using the Setup Wizard Wizard continued continued The default IP address of the LAN port is set to 192.168.0.1. Click Next to accept the default set- tings. By default, the WAN port is set to automatically obtain an IP address from the ISP.

  • Page 5

    Installing the DI-804 using the Setup Installing the DI-804 using the Setup Wizard Wizard continued continued If you are using a backup dial-up modem with the broadband router, place a checkmark in the box and enter the settings for the dial-up connection.

  • Page 6

    Checking the connection to the Internet Checking the connection to the Internet To check the connection, open the web browser and go to your favorite website. If you are unable to browse, please do the following: 1. Refer to Appendix B to check your connection to the wireless router.

  • Page 7

    Assigning a Static IP Address If the network adapter is unable to obtain an IP address automatically from the Broadband Router, then go to START>SETTINGS>CONTROL PANEL>NETWORK then highlight “TCP/IP” and Click on “Properties.” Select the “Gateway” tab and enter the Gateway IP Address of 192.168.0.1 Next, select the “IP Address”...

  • Page 8

    APPENDIX APPENDIX Checking Your Network Connections Use “Ping” to check your network connections. Go to START>RUN Type “command” in the box. Click OK. Type “ping 192.168.0.1”, which is the IP address of the LAN port of the Broadband Router. Hit the “Enter” key. A successful connection will show four replies, as shown at left.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: