General Setup - D-Link DI-804 User Manual

Broadband router

Hide thumbs Also See for DI-804:

Table of Contents

General Setup

The General Setup screen enables you to configure general filtering

and logging settings for all users. You can Enable or Disable the Call Filter

or Data Filter and set a specific Start Filter Set.

You can set the Log Flag to None, Pass, Block or No Match. None

means that the log function is inactive. Block means that the log function

will record all blocked packets. Pass means that the log function will record

all passed packets. No Match means that the log function will record all

packets that are unmatched.

Note: When using Telnet, the filter log will be displayed if you type the

"log -f" command.

The MAC Address for Packet Duplicate log function can record the

logged packets via Ethernet. If you want to duplicate logged packets from

the router to another network device, you must enter the MAC Address

Table of Contents