First Dubbing ("New") - Hitachi DZ-HS903A Instruction Manual

First Dubbing ("New")

This option allows you to dub scenes
which were recorded to the HDD and
have not yet been dubbed to DVD.
Connect the AC adapter/charger to
the camcorder (p.38).
1
• Dubbing is not possible if a
battery pack is used as a power
source.
Turn the power switch to "HDD"
2
(p.24).
Press DUBBING.
The dubbing menu appears.
D u b b i n g M e n u
3
New
Date
Dubbing the scene which
isn't dubbed in HDD.
ENTER EXIT
Select "New", then press the
4
confirmation button.
Choose a disc for dubbing and insert
5
it into the camcorder (p.34).
82
6
7
8
9
10
All
Hints
Select
• You can also display the
• If you want to use "New"
Check the screen for finalization
setting.
If you are using a DVD-RW (VF
mode) or DVD-R, you can
finalize the disc continuously
after dubbing is complete.
Select "YES" to finalize or "NO"
not to finalize.
Select "YES", then press the
confirmation button.
Dubbing starts.
When another disc is needed to
continue dubbing, a message screen
requesting another blank disc
appears. Replace a disc with a new
one.
After the dubbing is complete, the
confirmation screen whether or not
you delete the dubbed scenes
appears.
• If you wish to erase the dubbed
scenes, select "YES".
• If you wish to leave them on the
HDD, select "NO".
Remove the disc.
• Or press C to end.
Dubbing Menu from the Disc
Navigation screen. Press
press MENU, select "Scene"
"Dubbing" "Dubbing
Menu", and then press the
confirmation button.
dubbing for a dubbed scene,
clear the dub marks (p.86).
,