Let's Get Started; Preparing; Setting Up The Battery Pack - Hitachi DZ-HS903A Instruction Manual

Let's Get Started

Setting up the battery pack

Connect the power cable to the AC adapter/charger.
Plug in the power cable to a wall outlet.
Attach the battery pack to the AC adapter/charger.
Attach the battery pack to the camcorder.
CHARGE indicator
If the CHARGE indicator does not light,
check that the connections (
are firmly connected.
Charge status of the battery pack
The CHARGE indicator of the AC adapter/charger allows you to check on the
charge status of the battery pack.
Charge Status
During charge
Charge complete
Notes
• Charge battery pack in temperatures above +50ºF (10ºC) and below +86ºF
(30ºC).
• Use only the AC adapter/charger which accompanied your camcorder or
direct replacement as listed in this manual.

Preparing

, , )
Note
Charging will not occur if the DC power
cord is connected.
CHARGE indicator
lit
Unlit
Terminal at
bottom
* For details on charging time,
see p.37.
21