During Playback - Hitachi DZ-HS903A Instruction Manual

During playback

Symptom
Recognition of the Is the disc dirty?
disc does not Use a soft cloth to clean it.
complete.
Pressing the Was the image recorded by another device?
playback button will Playback of some images recorded on other devices may
not start playback. be impossible on this camcorder.
Has a scene been edited on another device?
If a scene recorded on this camcorder is edited on another
device, playback may not be possible on this camcorder.
No playback picture Is the TV input selector set correctly?
appears on the TV Some TVs have multiple video input jacks. Check
screen. whether the correct input was selected on the TV to
match the connected jacks. If the camcorder is connected
to a VCR, set its input selector to "external input
(LINE)".
Is the camcorder connected to the TV correctly?
Check the connections.
Images recorded in Have you connected the camcorder to a 4:3 TV that does
"16:9" (wide) mode not support the wide mode feature? In such a case, set the
are vertically "TV Type" setting of the camcorder to "4:3".
distorted on the TV
screen.
Playback picture is Is the disc scratched or dirty?
momentarily Clean the disc.
interrupted.
Movie playback Was the image input from an analog VCR (VHS, 8 mm)
quality is poor and recorded?
The problem may be improved if a VCR equipped with a
TBC circuit is used for playback. (DZ-HS903A)
Still picture is very Was recording of external input made with "Frame"
blurred. specified?
Specify "Field" for "PHOTO Input" in the record
functions setup menu. (DZ-HS903A)
No sound. If you are viewing images on a TV, is the TV volume
control set correctly? Adjust the TV volume.
Disc Navigation The original image may have been distorted when
thumbnails do not
recorded through the AV/S terminal. Record image again,
appear. without noise or distortion.
Cause and Correction
Reference
page
170
—
—
116
115
117
170
—
78
116
—
161