Hitachi DZ-HS903A Instruction Manual page 152

Message
DVD error has
occurred.
Please keep DVD
inside and set power
switch to "DVD".
DVD error has
occurred.
Unfinalizing is not
complete.
DVD full. Cannot
execute.
DVD must be
finalized before it
can be played back
on DVD player or
DVD recorder.
Drive overheat.
Please retry later.
DVD-R* cannot dub
the scene recorded in
STD mode and 16:9.
DVD-R*, Different
video mode, 16:9
and 4:3 mode cannot
exist together.
DVD-R*, 16:9 mode
cannot be changed,
when Video mode is
STD.
DVD-R*, Input
Source cannot be
changed.
152
Cause & Troubleshooting
This message appears if a disc error has occurred during
dubbing.
Leave the disc inserted and turn the power off. Connect
the AC adapter/charger to the camcorder and set the
power switch to "DVD". The video file will be repaired.
This message will appear when a disc error occurs during
the unfinalization process. Replace the disc.
This message will appear if the capacity of the scene
selected is larger than the free space on the disc. Select
another scene, or use another DVD.
• This message will appear if you remove a DVD-RW
(VF mode)/DVD-R disc that has not been finalized.
• See *5 on p.156.
The temperature inside the camcorder is too high. In this
case, proper writing/reading HDD/DVD may not be
possible. Turn off the power, then wait for a while.
With a DVD-RW (VF mode)/DVD-R/+RW disc, video
cannot be recorded with a combination of movie quality
"STD" and 16:9 mode "On". Use a DVD-RAM or DVD-
RW (VR mode) disc for dubbing.
* "DVD-RW (VF)" will appear when using a DVD-RW
(VF mode) disc, and "+RW" will appear when using a
+RW disc.
With a DVD-RW (VF mode)/DVD-R disc, the movie
quality mode and 16:9 mode cannot be changed in the
middle of a disc. Change the movie to be dubbed or
replace the disc with a DVD-RAM/DVD-RW (VR
mode)/+RW disc.
* "DVD-RW (VF)" will appear when using a DVD-RW
(VF mode) disc.
With DVD-RW (VF mode)/DVD-R/+RW discs, the
setting of 16:9 mode is not possible when the Video mode
is STD.
* "DVD-RW (VF)" will appear when using a DVD-RW
(VF mode) disc, and "+RW" will appear when using a
+RW disc.
Once a DVD-RW (VF mode)/DVD-R has been recorded
in 16:9 mode, the input source cannot be changed.
* "DVD-RW (VF)" will appear when using a DVD-RW
(VF mode) disc.
Reference
page
26, 38
121
80
118
—
76
77
76
77