Adjusting The Hand Strap; Attaching The Lens Cap - Hitachi DZ-HS903A Instruction Manual

Warning
BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT
RECHARGE, DISASSEMBLE, OR DISPOSE OF IN FIRE.
Note
Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba
CR2032, or Duracell DL2032. Use of another battery may present a risk of
fire or explosion.

Adjusting the hand strap

Fasten the hand strap according to the procedure in the diagram.

Attaching the lens cap

Tie the lens cap to the hand strap using the string (all supplied).
Pass the small loop end of the string through the lens cap
eyelet and knot.
Tie the strap to the the hand strap.
Attach the lens cap to the lens.
Notes
• To protect the lens, attach the lens cap to the lens when you are not using
the camcorder.
• Wipe the lens using a soft dry cloth if the lens gets dirty.
18
Flip the cover.
Flip the belt.
Replace the belt.
Replace the cover.
small loop