Table of Contents
Advertisement
JUMPING TO SPECIFIED POINT (GO TO)
1 Press the MENU
button
during
playback.
2 Choose the option
(point you want
to go
to), and then press the 1_/11 button.
Top:
To go to the start, and enter playback
pause.
End:
To go to the end of last scene, and enter
playback
pause.
Specify:
To go to a specified
point and enter playback
pause. See the follo;x ing for details.
OSpecifying
the point to view
1
Choose "Specify"
in step 2 above,
and then
press the 1_/|| button.
The screen
for specifying
the point
to go to
will appeal2
Position of currently
Total recording time of
3
Press the 1_/1| button to enter the selection.
The DVD video camera/recorder
will go to
the specified
point and enter the playback
pause status.
Pressing
the 1_/11 button
again will start
playback.
2
Use the I-_1/_t_1/'_1/11_
buttons
to select
the desired
time of chosen point.
Press _
: To select the start.
Press IN_
: To select the end.
Press '_1 or 11_
:
•
Press
once:
To move the cursor
in ]0-second
units
(1-still units for card)
• Hold down:
To move the cursor
in 1-minute
units
(10-still units for card)
Note:
• To cancel the "Go To" procedure
midway, press the •
button before going to the specified point.
• If multiple scenes are selected using the Disc
Navigation function or PHOTO/SELECT
button,
choosing "Top" will jump to the beginning of selected
scenes (p. 105),
• When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording
time" display.
• With card the number of stills will appear at the
"TOP", "CURRENT",
"END" and "GO TO" indicators,
• The cursor may not move at same-pitch
intervals,
(When the start of scene is selected)
77
Advertisement
Table of Contents
