Table of Contents
Advertisement
An image recorded
with "16:9 On" specified
will appear as follows:
Display on LCD monitor screen
Display in viewfinder
Images
recorded
with "16:9 Off" specified
will appear as follows:
Display on LCD monitor screen
Display in viewfinder
Note:
• The 16:9 setting will be kept even after the DVD video camera/recorder
is turned off.
• The 16:9 mode cannot be used with photo recording, external input .1 , S-VIDEO
external input .1.
• When using a DVD-RW (VF-mode)/DVD-R/+RW:
You cannot specify the combination
of "VIDEO Mode: STD" and "16:90n"(p.
85). If you specify "16:9 On" and try
to switch the VIDEO Mode to "STD" from "XTRA" or "FINE", the screen will automatically
switch to the 4:3-aspect
ratio display.
• Once the DVD-RW (VF-mode)/DVD-R
disc has been recorded
in the wide-screen
mode, you will not be able to
switch to recording of external input .1 or S-VIDEO
external input .1 using the same disc.
• When using DVD-RW (VF-mode)/DVD-R,
switching
between wide mode (16:9) and normal mode (4:3) will not be
possible while using the same disc.
• Images recorded with "16:9 On" (aspect ratio 16:9) specified
will be played back with the setting used during
recording regardless of the 16:9 setting then being used.
• The 16:9 setting is not compatible
with ID-1/ID-2 .2.
• If you connect this DVD vide camera/recorder
to the $1 or $2 terminal of TV, the TV will automatically
switch to
the wide-screen
mode: See TV instruction
manual for details.
• When using a video selector, the TV may not automatically
be switched to 16:9 mode.
• If you connect the DVD video camera/recorder
with a disc recorded
in wide mode to a TV with 4:3 display only
and play it back, vertically long images will appear. To display 4:3 images, set "TV type" (p. 111) to 4:3 and view
the images.
• If you play back a +RW recorded
in wide mode on a DVD recorder/player,
etc., vertically long images will appear
even on a wide-screen
TV. In this case, change the setting on the DVD recorder/player
or set "TV type" (p. 111) to
4:3 and view the images.
"1 The DZ-HS300A
cannot receive any externally
input signal.
*2 This system records the aspect ratio (16:9, 4:3) information
in void space between
video signals.
66
Advertisement
Table of Contents
