Table of Contents
Advertisement
Turning DVD Video Camera/Recorder
On and
Off
While holding
down
the gray button
at the right
of power s_x itch, set the switch according
to
each recording
function:
Set to "OFF":
The DVD video camera/
recorder
_xil] turn off
Set to "SD":
To record photos oil an SD
nremory
card and play
them back
Set to "HDD":
To record or dub movie
on
HDD and play it back
Set to "DVD":
To record movie on DVD-
RAM / DVD-RW/DVD-R
/
+RW and play it back
Note:
• Once you turn the DVD video camera/recorder
on to
let it recognize the disc, you can immediately
record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted,
it will take some
time for the DVD video camera/recorder
to start
because it must recognize the disc again (see
"Troubleshooting"
on page 146).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation
screen after
power is turned on.
• When the DVD video camera/recorder
is turned on,
the self-diagnosis
function will work and a message
may appear. In this case, refer to "Trouble Messages"
on page 139 and take corrective action.
• When turning the DVD video camera/recorder
off or
changing over the power switch between "HDD" and
"DVD", you will not need to hold down the gray button:
Simply move the power switch.
Power switch
33
Advertisement
Table of Contents
