Table of Contents
Advertisement
CREATING DVD-VIDEO USING IMAGES RECORDED ON HDD/DISC
You can use the images recorded
on the DVD video camera/recorder
to create a disc that can be
viewed
on DVD recorders/players.
* A DVD-RW/DVD-R/+RW
recorded
on this DVD video camera/recorder
must be finalized
on this
DVD video camera/recorder
(see page 108).
If the file system
of HDD in your PC is FAT32, no video
file larger than 4 GB can be imported,
due to
restrictions
of file system.
When using a large video file, handle
it on an NTFS format HDD.
1
Connect
this DVD video camera/recorder
to
4
Setting up project
the USB port of PC.
To save images recorded
on a disc, first insert
the disc you wish to save into the DVD video
camera/recorder,
and then connect
the DVD
video camera/recorder
to the USB port of PC.
2 sL
t art Irna_eM]xe],_
"
"3.
_Nhen lmageMixer
3 starts up, the launcher
shown below will appoar: Click "Author
DVD-Video'.
Click
3
Click "Create
New DVD'.
Set up a project. You can set up the
designated
save location
of edited contents
and image quality.
Be sure to choose "NTSC"
for the video
system.
This DVD video camera/recorder
uses Dolby
Digital for the audio recording
format:
Choose "Doiby
Digital"
for audio setting.
After setting up the project, click the "OK"
button.
Click
129
Advertisement
Table of Contents
