Table of Contents
Advertisement
OSwitching
the information display mode
You carl switch the display
mode of on-screen
information:
Press the DISPLAY button.
The full and minimum
display
modes
will alternate.
• Full display
mode:
All types of information
will
appear.
• Minimum
display
mode:
The recording
mode (see
i on page 46) and recording
status (see 11 on
page 46) will appear.
If the DVD video camera/
recorder
has _xarning information,
a warning
message will appeal_
Note:
The DVD video camera/recorder does not record the date and time as a part of image. However,this information
during recording will be recorded with image as data which can be checked on Disc Navigation screen during
playback (see "INFORMATIONDISPLAY DURING RECORDING" on page 46).
ODisplay
when recording an image of yourself
When recording
with the LCD screen facing the same direction
as the
lens, the operating
status will appear:
The battery
remaining
level will
appear
only when the remaining
level is very lo_x: and the display
will
blink.
Operating status/warning message
Battery remaining level_,w
I
I-
No warning/message
(see page 46) _xill appear when recording
with the LCD screen facing the same
direction
as the lens.
Instead,
the following
screen display
symbols
will blink to inform you of the operation
status of
DVD video camera/recorder.
When the LCD monitor
is turned
180" from the position
with the LCD screen facing the same
direction
as the lens, the warning/message
can be checked.
49
Advertisement
Table of Contents
