Table of Contents
Advertisement
7
Click
"Authoring"
and
create
a DVD-Video
FrienD.
Clicking
"Authoring"
will display
the editing
screen
of DVD-Video
menu.
The video
file
previously
imported
into PC will appear
in
"Source".
Choose
the desired
video
file, and
click
"Add
titles": The video
file will be registered.
When
using
a video
file imported
into
PC
using
[mageMixer
3, click
"File"
to choose
the
folder
in which
the video
file will be stored.
Click
Clicking
"Thenre"
or "Set title menu" will
allow you to change the design
of DVD-Video
lmenll.
Choose tile type of disc to be created
(8 cm/
12 cm/2-1ayer)
using [Set] - [Configuration].
8 Click "Write"
to create a DVD-Video.
Clicking
"Write" will display
the screen for
writing.
Check "Create
disc", perform
setting for
write, such as choosing
DVD write drive, and
then set a blank DVD-RW/DVD-R
into the
drive.
Clicking
"Preview"
will allow you to check
any image of DVD to be created.
Click the "Write" button: The screen for
setting write will appear.
After checking
the
settings,
click "OK": Writing will start.
When _xrite is complete,
the drive will open
to eject the DVD: Creation
of an original DVD
is now finished.
Note:
• If you load a written
DVD-RW in the write drive, the
dialog "Are you sure you want to delete the content of
disc?" will appear.
Deleting the content of disc will erase all data on the
disc: Carefully check the contents
of disc.
Choosing "Yes" will display the screen for choosing
the disc erasure method: After checking
it, click the
"OK" button. Once the contents on disc have been
deleted, the cover of disc insertion
block on DVD
video camera/recorder
will open. Close the cover
following the message
instruction.
• If the disc contains a video file that does not conform
to DVD-Video format, the video will be re-encoded,
resulting in deterioration
of image quality.
• If you execute "File" - "Save project", the halfway
operation status can be saved as a project file.
Reading in this saved project file will allow you to
restart the operation from the saved status.
• A project file will be saved in the project folder that
was set in step 4 on page 129, and the file name will
be automatically
attached.
• If a video recorded on the HDD in this DVD video
camera/recorder
for extended hours is too long for
one disc, cut-edit the video so that it can be recorded
on one disc. See the on-line instruction manual of
ImageMixer
3 for cut-editing
of videos. To display the
ImageMixer
3 manual, choose "Help", and then
"Image Mixer Help (F1)", while ImageMixer
3 is being
executed.
• Since a menu is always added to a recorded video,
the data size of the created video will be larger than
that of the original video.
Click
Click
131
Advertisement
Table of Contents
