Table of Contents
Advertisement
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene, and playback
will
start from that point.
MOVING TO BEGINNING (END) OF HDD/DVD/CARD
I
Press the DISC NAVIGATION
button.
3
Use the I,ql_/l_l/_l/_/l_'/||
buttons
to
choose "Top" or "End"
on the "Go To" menu
2 Press the MENU
button,
screen, and then press the 1_'/1| button.
4 Press the 10../|| button to start playback.
m
HDD/DVD/Card
Management
INITIALIZING
HDD/DVD/CARD
Initializing
the HDD, a DVD-RAM/DVD-RW/+RW
o1:card _ill allow you to delete any recorded
contents.
Before using a DVD-RW/+RW
on this video camera/recordm_
you must format it.
Before You Begin
• Be sure to use the AC adapter/charger
to power the DVD video camera/
recorder for initialization.
If the DVD video camera/recorder
is turned off
during initialization and the initialization
is interrupted,
incorrect
initialization will result and the incorrectly initialized disc will be
unusable.
• If you use a brand-new DVD-RW/+RW,
message "DVD is not formatted"
will appear: Initialize the disc, following the subsequent
messages
(p. 41).
1
Press the DISC NAVIGATION
button.
2 Press the MENU
button.
3
Use the I,ql_l/l_l/_/_/l_/||
buttons
to
choose "Format
HDD',
"Format
DVD" or
"Format
Card"
on the "HDD Setting",
"DVD
Setting" o1: "Card"
menu
screen, and then
press the 1_'/1| button.
Note:
• If you wish to delete all recorded
contents, it is
recommended
that you use initialization,
which will
delete all the scenes in much less time than using the
scene delete function.
• Initialization will delete all the recorded contents on HDD,
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialize a disc with many
scratches
or dirt: Such a disc cannot be used (p. 10).
• This DVD video camera/recorder
may not recognize
some discs or cards that have been initialized on PC
or a device other than this DVD video camera/
recorder.
• If you attempt to initialize a disc or card in this DVD
video camera/recorder
when it is connected to PC via
PC connection
cable, the disc or card may not be
initialized and may be unusable on this DVD video
camera/recorder.
If you choose the VR mode when initializing a
finalized DVD-RW (VR-mode),
the finalization
will not
be released. (The DVD-RW will be a finalized disc
without any recorded data, and recording will be
possible on it.)
Choosing the VF mode will release the finalization
of
the disc.
The screen for verifying
"Format
HDD',
"Format
DVD" or "Format
Card" will appear.
4
Choose "YES", and then press the I_/ll
button.
When using DVD-RW, a screen for prompting
•
you to choose
the VF o1:VR mode will appear.
Choose
"NO"
to cancel
initialization.
105
Advertisement
Table of Contents
