Toner Cartridge - Sagem MF 3260 User Manual

Table of Contents

Advertisement

Chapter 1. Installation
Connecting the Telephone Cable
Connect the telephone cable to the fax machine by plug-
ging it into the socket located on the rear side of the
machine and designated by the word LINE. Insert the
telephone plug into your PTT line socket.
In GB
For all other countries
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the fax machine. Connect the mains cable to
the electrical socket.
Once the fax machine is connected to the power supply,
the quick install process will immediately commence.
You will be asked to select your country and to enter your
number and name as well as the date and time (see chap-
ter on Settings). If you would like to perform a quick in-
stall again, simply press
, and select it with
¨
page: 2 installation
¾ help
. Confi rm with OK.

Toner Cartridge

New Toner Cartridge
Before you can receive documents, make copies, or print,
a toner cartridge must be inserted into the fax machine.
For this reason, a starter cartridge is supplied with the
machine (this cartridge has a capacity of approximately
1,000 pages). Th e toner level memory for this starter
cartridge was set at the factory. Th e starter cartridge
need not be updated with a Plug'n'Print card. For each
additional toner cartridge that you insert into your fax
machine, you must update the toner level memory with
the Plug'n'Print card provided.
In order to guarantee a good print quality,
¡
use only original SAGEM toner cartridges.
Other toner cartridges can cause damage to the fax
machine. Use of other toner cartridges also voids
the guarantee.
1
Open the cover by taking hold of both document
guides and tipping the cover backward.
Remove the old toner cartridge, by gripping it at the
2
recess in the middle and pulling it upward.
Carefully remove the toner cartridge from
¡
the device so that no toner dust spills out.
Take care where you place the toner cartridge,
escaping toner dust may soil the surface.
1. Installation
1. Installation
9

Advertisement

Table of Contents
loading

Table of Contents