Avaya 4600 Series Installation Manual page 44

4600 Series IP Telephone Installation
Table 1: H.323 to SIP and SIP to H.323 Conversion Chart (continued)
Environment
H.323-centric
SIP-centric
SIP-centric
SIP-centric
44 4600 Series IP Telephone Installation Guide
To convert this To this type
type of telephone of telephone
SIP H.323
SIP H.323
H.323 in use SIP
H.323 factory set SIP
Then:
Perform the Mute SIG procedure to
change the SIG parameter value from
"2" (SIP) to "default" (H323). For
information, see Signaling Protocol
Identifier on page 77.
Press * to save the SIG parameter
change. Restart the telephone as
covered in Restart the Telephone
page 76.
Save the change & restart telephone.
Perform the Mute SIG procedure to
change the SIG parameter value from
"default" to "1" (H323). For information,
see Signaling Protocol Identifier
page 77.
Press * to save the SIG parameter
change. Restart the telephone as
covered in Restart the Telephone
page 76.
Perform the Mute SIG procedure to
change the SIG parameter value from
"1" (H323) to "default" (SIP). For
information, see Signaling Protocol
Identifier on page 77.
Press * to save the SIG parameter
change. Restart the telephone as
covered in Restart the Telephone
page 76.
No action is required because the
Signaling Protocol Identifier (SIG)
defaults to SIP. Upon power-up &
network connection, the telephone
automatically downloads the proper SIP
files from SES/CM.
on
on
on
on
2 of 2