Latest Boot File Loaded/No Application File Or Application File Needs To Be Upgraded - Avaya 4600 Series Installation Manual

15. While the entire flash memory is erased in preparation for rewriting the code, the following
message displays:
Clearing...
n%, x secs
where n is the percentage of memory erased and x is the number of elapsed seconds
during erasing.
16. While the boot code is rewritten, the following message displays:
Updating...
n%, x secs
where n is the percentage of boot code rewritten and x is the number of elapsed seconds
during rewriting.
17. When the new boot code is successfully written into the flash memory, the application
corrupts its own checksum stored in flash. The application then resets the telephone so the
latest system-specific application file can be downloaded.
18. Continue with the next procedure.
Latest Boot File Loaded/No Application File or
Application File Needs to be Upgraded
Use the following procedure:
Note:
This procedure occurs with normal application file upgrades.
Note:
1. The following message displays:
Restarting...
2. While the hardware is being initialized, the following message displays:
Initializing
Scenarios for the Restart Process
Issue 6 February 2007 99