About Local Administrative Procedures - Avaya 4600 Series Installation Manual

Hide thumbs Also See for 4600 Series:
Table of Contents

Advertisement

If
In certain procedures,
for example, SSON or
to display the extension
number, a value already
exists and you press
the # button to indicate
you either want to enter
a new value or have the
current value displayed
User input is not
allowed for example,
during processing
The telephone's boot
image is in the process
of being upgraded
An error beep tone
sounds

About Local Administrative Procedures

Local administrative procedures allow you to customize the 4600 Series IP Telephone
installation for your specific operating environment. This section provides a description of each
local administrative option covered in this guide, with references to the pages on which the
option appears.
Local Programming Option
802.1X
Static addressing
Automatic Gain Control
Visual Alerting mode control
Then (continued)
The Message Waiting indicator at the top of the telephone and
the Message button's LED on the faceplate are lit but not
flashing. Call Appearance Line a alternating with line b after an
1800 millisecond pause, if the value has more than one digit
winks 600 milliseconds on, 200 milliseconds off n times for
digit n to indicate the current value. The appropriate Call
Appearance Line indicator flutters five times to indicate the
digit zero. After feedback of the current value, the Message
Waiting indicator at the top of the telephone and the Message
button's LED flash 500 milliseconds on, 500 milliseconds off to
indicate user input is expected/required.
The Message Waiting indicator at the top of the telephone and
the Message button LED on the faceplate are steadily lit.
All LEDs, meaning Call Appearance Lines a and b, and both
Message indicators, light steadily during the download
process.
An invalid button was pressed. Try again.
Code
8 0 2 1 9 (8 0 2 1 X)
A D D R (2 3 3 7)
A G C (2 4 2)
A L E R T (2 5 3 7 8)
About Local Administrative Procedures
See
Set the 802.1X
Operational Mode
page 53.
Static Addressing
Installation
Disable/Enable Automatic
Gain Control
Visual/Audible Alerting
Procedure
Issue 6 February 2007
2 of 2
on
on page 54.
on page 58.
on page 59.
1 of 2
51

Advertisement

Table of Contents
loading

Table of Contents