Memory Channels; Memory Channel Selection; D Using The ∫ / √ Keys; D Using The Keypad - Icom IC-7700 Instruction Manual

8
MEMORY OPERATION

■ Memory channels

MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

■ Memory channel selection

D Using the /
∫

D Using the keypad

MEMORY
CHANNEL
NUMBER
Independent transmit and
1–99 receive frequencies and modes
in each memory channel.
One frequency and one mode in
each memory channel as scan
P1, P2
edges for programmed scan.
keys
√
Y Z
V/M
Keypad
F-IMP
Y Z
V/M
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
CAPABILITY
q Push
w Push
sired memory channel.
• Push and hold
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push
q Push
ENT
w Push F-INP
e Push the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push
channel.
[EXAMPLE]
To select the memory channel 3;
- Push F-INP
To select the memory channel 12;
F-INP
- Push
√
.
To select the scan edge channel P1;
F-INP
- P u s h
push ∫ or √ .
To select the scan edge channel P2;
- P u s h F-INP
push ∫ or √ .
8-2
TRANSFER OVER-
TO VFO WRITING
Yes Yes
Yes Yes
V/M to select memory mode.
∫ / √ several times to select the de-
∫
/ for continuous selection.
√
V/M to select memory mode.
.
ENT
∫
√
or to select the desired memory
7 , then push ∫ or √ .
,
3
ENT
1.8 3.5
, ,
1 2
ENT
1.8
50
, ,
1
ENT
1.8
50
, ,
1
ENT
CLEAR
Yes
No
V/M again.
, then push ∫ or
50
, , t h e n
0 0
1.8
, , t h e n
0 1