Memopad Numbers; Main Dial Auto Ts - Icom IC-7700 Instruction Manual

■ Others set mode
SPEECH [MODE] Switch
Selects the operating mode speech capability when
a mode switch is pushed; ON or OFF.
(default: OFF)

Memopad Numbers

Sets the number of memo pad channels available. 5
or 10 memo pads can be selected. (default: 5)

MAIN DIAL Auto TS

Sets the auto tuning step function for the main dial.
When rotating the main dial rapidly, the tuning step
automatically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster). (default: HIGH)
MIC Up/Down Speed
Sets the rate at which frequencies are scanned when
the microphone [UP]/[DN] switches are pushed and
held. HIGH or LOW can be selected.
Quick RIT/∂TX Clear
Selects the RIT/∂TX frequency clearing instruction
with the switch.
CLEAR
[NOTCH] Switch (SSB)
Selects notch functions for SSB mode operation from
Auto, Manual and Auto/Manual.
[NOTCH] Switch (AM)
Selects notch functions for AM mode operation from
Auto, Manual and Auto/Manual.
DIGI–SEL VR Operation
Selects [DIGI-SEL] control function from DIGI-SEL
and APF.
(continued)
12-15
OFF
When "ON" is selected, the selected operating mode
is announced when a mode switch is pushed.
5
HIGH
• HIGH : Auto tuning step is turned ON. Fastest
tuning step during rapid rotation. (default)
• LOW : Auto tuning step is turned ON. Faster tun-
ing step during rapid rotation.
• OFF : Auto tuning step is turned OFF.
HIGH
• HIGH : High speed (default; 50 tuning steps/sec.)
• LOW : Low speed (25 tuning steps/sec.)
OFF
• ON : C l e a r s t h e R I T / ∂ T X f r e q u e n c y w h e n
is pushed momentarily.
CLEAR
• OFF : C l e a r s t h e R I T / ∂ T X f r e q u e n c y w h e n
is pushed and held for 1 sec.
CLEAR
(default)
Auto/Manual
• Auto : Only the auto notch can be used.
• Manual : Only the manual notch can be used.
• Auto/Manual : Both the auto and manual notch can
be used. (default)
Auto/Manual
• Auto : Only the auto notch can be used.
• Manual : Only the manual notch can be used.
• Auto/Manual : Both the auto and manual notch can
be used. (default)
DIGI–SEL
• DIGI-SEL : [DIGI-SEL] control functions as the dig-
ital selector operation. (default)
• APF : [DIGI-SEL] control functions as the
audio peak filter adjustment.
12
SET MODE