Frequency Transfers; D Transferring In Vfo Mode; D Transferring In Memory Mode - Icom IC-7700 Instruction Manual

8
MEMORY OPERATION

■ Frequency transfers

D Transferring in VFO mode

TRANSFER EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
or
V/M

D Transferring in memory mode

TRANSFER EXAMPLE IN MEMORY MODE
VFO frequency : 21.320 MHz/USB
Contents of M-ch 16 : 14.018 MHz/CW
V/M
Beep
Push for 1 sec.
Beep
Beep
Beep
Beep Push for 1 sec.
Beep
Programmed contents appear.
The frequency and operating mode in a memory
channel can be transferred to the VFO. Frequency
transfers can be performed in either VFO mode or
memory mode.
This is useful for transferring programmed contents to
a VFO.
q Select VFO mode with
w Select the memory channel to be transferred with
∫
√
/ .
• Memory list screen is convenient for selecting the de-
sired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel. In this case transferring is not possible.
e Push and hold
quency and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• Displayed frequency, mode and filter setting are
transferred.
• Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
∫
√
/ in memory mode.
• And, set the frequency or operating mode if required.
w Push and hold
quency and operating mode.
• Displayed frequency and operating mode are trans-
ferred to the VFO.
e To return to VFO mode, push
8-4
V/M .
V/M for 1 sec. to transfer the fre-
for 1 sec. to transfer the fre-
V/M
momentarily.
V/M