File Loading - Icom IC-7700 Instruction Manual

■ File loading

/
SORT OK
F-6
DIR/FILE ∫ √
F-1 F-2 F-3
/
WIDE CANCEL
F-7
EXIT/SET
LOAD OPTION
F-4 F-5
By loading the saved setting file from the USB-
Memory, you can easily set up another IC-7700—sev-
eral operators settings can easily be applied to one
IC-7700.
q During set mode menu screen display, push
[USB] to select USB set menu screen.
F-7
w Push [LOAD]
• The indicator above the USB connectors and "USB"
indicator on the display blink.
• After the USB-Memory contents are displayed, the in-
dicators stop blinking.
e Push [OPTION]
mode, then set the desired loading conditions, if
desired.
• See page 12-21 for details.
r Push [Y]
F-2
setting file.
t Push [LOAD]
• Confirmation screen appears.
y Push [OK] F-6
• After the loading is completed, the message dialog,
"Reboot the IC-7700," appears.
u Turn the transceiver power OFF then ON to make
the setting effective.
12-23
SET MODE
F-1 to select setting load screen.
to select load option set
F-5
or [Z] to select the desired
F-3
.
F-4
to starts loading.
12