Daily Timer Setting - Icom IC-7700 Instruction Manual

■ Daily timer setting

/
TIMER2 ≈ TIMER4
F-2
/
TIMER
TIMER1 Ω
F-1
/
CLR TIMER5 SET
F-4 F-5 F-7
Main dial
EXIT/SET
TIMER3
F-3
The transceiver turns power ON and/or OFF automat-
ically on the specified day and time, with the specified
frequency settings.
q Push
EXIT/SET
screen, if necessary.
w Push and hold
screen.
e Push one of [TIMER1]
select the desired timer.
r Rotate the main dial to select the timer action ON
or OFF.
t Push [u]
F-2
the main dial to select the desired day of the week.
• Select "– – –" not to specify the day of the week. The
timer will function every day in this case.
• Once a day of the week is selected, push [CLR]
select "– – –."
y Push [u] F-2
rotate the main dial to select the repeat function
ON or OFF.
• ON : The timer functions every selected day of the
week. (repeats)
• OFF : The timer does not repeat.
u Push [u]
F-2
the main dial to set the desired transceiver power
ON time.
• When using power OFF timer only, push [CLR]
select "– – –." This setting cannot be set when the
power OFF timer is set to "– – –."
i Push [u]
F-2
the main dial to set the desired transceiver power
OFF time.
• When using power ON timer only, push [CLR]
select "– – –." This setting cannot be set when the
power ON timer is set to "– – –."
o Push [u] F-2
the main dial to select the desired memory channel
number.
• If using the currently set VFO condition, push [CLR]
to select "– – –."
F-4
!0 Push [SET] F-7
• The timer indicator above
!1 Repeat steps e to !0 to set other timers, if desired.
!2 Push EXIT/SET
11-3
CLOCK AND TIMERS
several times to close multi-function
for 1 sec. to select timer set
TIMER
to [TIMER5]
F-1
to select the "DAY" cell, then rotate
to select the "REPEAT" cell, then
to select the "ON" cell, then rotate
to select the "OFF" cell, then rotate
to select the "Mch" cell, then rotate
to set the timer.
switch lights green.
TIMER
to exit timer set screen.
11
to
F-5
to
F-4
to
F-4
to
F-4