Start Delta-T Cooking; Starting Low Temperature Cooking - Henny Penny SMART COMBI FM05-061-A Operating Manual

Operation

4.9.5 Start Delta-T cooking

Requirements

4.9.6 Starting low temperature cooking

50
4. Set the target core temperature if desired.
5. Set the chamber humidity.
6. Load the unit.
7. Press S t a r t / St o p ( 8 ).
The multi-function display (4) shows:
- the set cooking temperature
the set cooking time
-
the target core temperature
-
Unit is switched on
NOTICE
Since the core temperature of the food being cooked is needed, you
must use the core temperature sensor with Delta-T cooking.
1. Press the right s e le c t bu t t o n (6 ) .
The multi-function display (4) shows "ΔT cooking" and "LT cooking".
2. Use C omb iDia l (9 ) to select "ΔT cooking".
NOTICE
Delta-T cooking is possible with the "Steaming", "Combisteaming" and
"Convection" cooking modes.
3. Press cooking mode button.
The key's LEDs are lit.
The multi-function display (4) shows the cooking mode, Delta-T value
and target core temperature.
4. Use C omb iDia l (9 ) to set the Delta-T value.
5. Set the target core temperature with C o m b i Di a l ( 9 ) .
6. Press S t a r t / St o p ( 8 ) to start the cooking program.
The multi-function display (4) shows the current chamber temperature
and the target core temperature.
Low temperature cooking without core temperature measurement
Operating manual
SmartCombi
Global Foodservice Solutions
™