Operation
7 USB } cookbook
receiving
7 USB } cookbook
Cookbook loaded
4.9.1 Starting the steaming process
Requirements
4.9.2 Start Combisteaming
Requirements
48
4. Press C o m b i Di a l ( 9 ) to select SmartMenu cooking programs to
load.
5. Press the right bu t t o n (6) to SmartMenucooking programs.
SmartMenu cooking programs are loaded from the USB memory stick.
While it is saving, the multi-function display (4) flashes "Loading" on the
1
screen.
The total number of cooking programs loaded appears.
Once it has been saved, the multi-function display (4) shows "Cookbook
loaded" on the screen and the total number of loaded cooking programs.
50
NOTICE
If a SmartMenu cooking program of the same name is already on the
device, it will be overwritten.
4.9 Manual cooking
Unit is switched on
1. Press St e a min g (1 5 ).
2. Set the cooking temperature.
3. Set the cooking time.
4. Set the target core temperature if desired.
5. Load the unit.
6. Insert the core temperature sensor into the food to be cooked (see
Chapter "Measuring the core temperature", Page
7. Press S t a r t / St o p ( 8 ).
The multi-function display (4) shows:
the set cooking temperature
-
the set cooking time
-
-
the target core temperature
Unit is switched on.
1. Press C o mb is t e a m in g ( 3 ) .
2. Set the cooking temperature.
3. Set the cooking time.
Operating manual
SmartCombi
39).
Global Foodservice Solutions
™