Fcc And Industry Canada; Canadian Doc Statement; Waste Electrical And Electronic Equipment Labelling - Kodak EasyShare 5500 User Manual

Chapter 10
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by
one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the
distance between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit other
than that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician
for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. Where shielded interface cables have been provided with
the product or specified additional components or accessories elsewhere defined to be used with the
installation of the product, they must be used in order to ensure compliance with FCC regulations.
CAUTION
When using the wireless interface with an AiO printer, this equipment should be installed and
operated with a minimum distance of 20 cm (7.9") between the radiator and your body for
2.4 GHz operations. This transmitter must not be collocated or operated in conjunction with
any other antenna or transmitter.

FCC and Industry Canada

This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Canadian DOC statement

DOC Class B Compliance - This Class B digital apparatus complies with Canadian ICES-003.
Observation des normes-Class B - Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
CE
Eastman Kodak Company hereby declares that this Kodak Wi-Fi card is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

Waste Electrical and Electronic Equipment labelling

In the European Union, this symbol indicates that when the last user wishes to discard this
product, it must be sent to appropriate facilities for recovery and recycling. Contact your local
Kodak representative or refer to
collection and recovery programmes available for this product.
112
www.kodak.com/go/recycle for additional information on the
Kodak EasyShare 5500 AiO