Printing On Non-Standard Paper Sizes - Canon iPF8300S User Manual

8.
Make sure the width of the loaded roll is displayed in the
Note
• If the width of the loaded roll is not displayed in
Main pane and update the printer information.
9.
C
In Page Size, make sure 100*500 is displayed, as registered in Page Setup.
10.
D
Select the Enlarged/Reduced Printing check box.
11.
F
Click Fit Roll Paper Width.
12.
Confirm the print settings, and click
Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)

Printing on Non-Standard Paper Sizes

For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set up to 18.0
m.
Note
• In Windows, although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m.
The setting of Custom Size is disabled when you exit the application software.
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as appropriate for your
computer and operating system.
• Printing on Non-Standard Paper Sizes (Windows)
• Printing on Non-Standard Paper Sizes (Mac OS X)
iPF8300S
Enhanced Printing Options
B
Roll Width list—in this case, 16 in. (406.4mm).
B
Roll Width, click
M
Print to start printing.
→P.132
→P.135
> Printing banners or at other non-standard sizes
L
Printer Information on the
Printing on Non-Standard Paper Sizes
>
"
→P.492
131
2