Borderless Printing By Resizing Originals To Fit The Roll Width - Canon iPF8300S User Manual

Enhanced Printing Options
17.
Confirm the print settings, and then click

Borderless Printing by Resizing Originals to Fit the Roll Width

Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a
surrounding margin, or border.
• Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can
2 print documents without the margin, so that the printed image covers the entire surface of the paper.
Important
• Borderless printing is only available with rolls.
• Always set the blue Switch on the Platen to the ● side for borderless printing. Printing quality may be
• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular
• Paper incompatible with the printer's auto cut function can be printed without borders on the left and
• These features cannot be used in combination with borderless printing: special page layouts, centering
• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing bor-
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be
• When CutDustReduct. is set to On, print without borders only on the left and right sides.
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit
• Borderless Printing Method
114
Choose the method of borderless printing that suits the original, as desired.
Borderless Printing by Resizing Originals to Fit the Roll Width
> Borderless Printing
Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X)
affected if the Switch is incorrectly set.
widths. For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide. (See " Types of Paper
right sides only.
originals, and printing cut lines on rolls.
derless printing, Rotate Page 90 degrees (Conserve Paper) cannot be selected.
uneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. In
this case, the paper can be printed without borders on the left and right sides only. After ejecting and
cutting the printed document, use scissors to cut away the top and bottom edges.
touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that
is cut, depending on frequency of use. In this case, follow these steps to change the ink drying time.
• On the Main sheet of the printer driver, click Settings in Media Type.
• Select the ink drying time in the Between Pages list of Drying Time.
>
M
Print to start printing.
")
→P.774
"
→P.492
iPF8300S