Table of Contents
Advertisement
R
Cumberland Gap
Wood Stove
Baffle Diverter
is shipped
inside firebox.
WARNING
Risk of Fire.
Required on all rear horizontal
installations.
Excessive smoke or flame spillage
into the room may occur.
Page 18
BENDING TEMPLATE
Cut Ends
Hand Bend #1
Hand bend #2
Straight End
Cut Ends
7006-188E
STRAIGHT END
Lay the flat diverter on the
template with the cut ends
at the bottom of the tem-
plate.
HAND BEND #1
Bend the diverter to match
the same degree bend as
in the template.
HAND BEND #2
Bend the diverter 90° to
complete the process.
Place diverter on tem-
plate to confirm the bends
match the template.
CUT ENDS
Hide quick links:
Advertisement
Table of Contents
