Tracing A Malicious Call - Nortel 1140E User Manual

While on an active call

Tracing a malicious call

Use the Call Trace feature to trace nuisance calls within your system.
This feature is not enabled on all IP Phone 1140Es. Contact your system
administrator to configure this feature on your IP Phone.
To use Call Trace while on a call:
CallTrace
To use Call Trace without a Call Trace key:
Trans
or
102
2. Press the flashing line (DN) key. The call
waiting information appears.
If you are using another feature key, you
can use the
information associated with those
feature keys.
Press the
1. Choose one of the following:
Conf
— Press the
— Press the
2. Dial the
dial the
reconnect.
key to access
Display
key.
Call Trace
Transfer
Conference
followed by
SPRE code
FFC to automatically
Call Trace
soft key.
soft key.
or
83