Resetting To Factory Default Settings - Dish Network Satellite Receiver User Manual

5. Select
Enable Caller ID
6. Select .
Done

Resetting to Factory Default Settings

: Resetting the receiver to factory default settings discards all
Note
except the
Lists All Chan
: If you have set any locks on the receiver and the receiver is locked,
Note
these locks will be kept. If the receiver is unlocked, any such locks will be
lost; however, you cannot reset the receiver to factory default settings to
bypass a lock or to discard a password you have forgotten. Call the
Customer Service Center if you have forgotten your password.
Complete the following instructions if you want to reset the receiver to be
the same as when it was shipped from the factory.
1. Press the MENU button.
2. Select the
System Setup
3. Select the
Factory Defaults
a message, confirm that you want to reset the receiver
Warning
to factory default settings
.
or select
Disable Caller ID
and lists.
All Sub
option.
option. When the receiver displays
Resetting to Factory Default Settings
.
Favorite
Page 73