Dish Network Satellite Receiver User Manual page 88

Chapter 3
Using the System
Other Remote Control Features
Page 84
Select Button
The SELECT button works as the INPUT SELECT button for the tuner or
amplifier.
Switch Between TV and AUX Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons
control the TV volume. However, if you want to use the AUX mode to
control a tuner or amplifier and the device has a volume setting, you can set
up the remote to control the device's volume instead of the TV volume.
To set the remote to control the device's volume
1. Press and hold the AUX mode button for three seconds, and
then release it. The AUX mode button blinks.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME button.
4. Press the 0 number button.
5. Press the POUND (#) button.
The AUX mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the
VOLUME button.
The device's volume changes and the AUX mode
button lights instead of the TV mode button.
To set the remote back to control the TV volume
1. Press and hold the TV mode button for three seconds, and then
release it. The TV mode button blinks.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME button.
:
: