Setting Up TV1 to Operate in IR
The following instructions describe how to set up TV1 to operate in IR only.
1. Perform the following with an existing remote control:
a. Open the
TV1 UHF Pro Setup
the remote control.
b. Select
Disable
c. Select
System Info
2. Using an IR remote control, such as a Remote Control 3.4, that you
intend to use to control TV1:
a. Press the RECORD button. The
highlighted.
b. Make sure the
shows
Address
screen by pressing MENU-6-1-8 on
from the
TV1 UHF Pro Setup
to open the
System Info
Done
screen shows that the
System Info
.
IR
Setting Up TV1 to Operate in IR
screen.
screen.
button should be
Primary Remote
Page 35