System Updates; Resetting Your Receiver - Dish Network Satellite Receiver User Manual

6. Press the UP or DOWN ARROW button to enable or disable the
automatic update feature.
: If you disable this feature, no new
Note
will be available until the you turn off the receiver.
7. Highlight the
Time Set
8. Use the NUMBER PAD buttons to set the time that you want the
system to update the
9. Highlight the
AM/PM
10. Press the UP or DOWN ARROW button to set
11. When you are finished making changes, select
: If you do not want to save your changes or if you want to reset the
Note
time the system updates the
select .
Done

Resetting Your Receiver

1. Press and hold the receiver POWER button until the front panel lights
blink.
2. Release the POWER button.
The receiver takes several minutes to reset, displays the message
"Acquiring Satellite Signal," may download the Program Guide, and
then returns you to programming.
Program Guide
field.
.
Program Guide
field.
Program Guide
information
or .
AM PM
to close the screen.
Done
, select and then
Defaults

System Updates

Page 87