Rheem 871 Series Owner's Manual And Installation Instructions page 34

TEMPERATURE CONTROL – DELUXE
Bath Fill Mode – Explanatory Notes
To operate the Bath Fill mode:
Turn off all Deluxe controllers
1.
It is advised to turn off all Deluxe controller(s) before
activating the Bath Fill mode.
Refer to the notes on the
controllers on page 30.
The Deluxe controllers do not need to be on to set
the bath fill temperature and bath fill water volume
and to turn on the Bath Fill mode.
Pull down the front panel on the Deluxe controller.
2.
The BATH FILL
TEMPERATURE up ( ) and down ( ) buttons will be
exposed.
Set the bath fill temperature
3.
Press the
(up button) or the BATH FILL TEMPERATURE
(down button).
The first press
TEMPERATURE
TEMPERATURE
last selected bath fill temperature setting.
While the bath fill temperature is displayed, each
subsequent
TEMPERATURE
TEMPERATURE
temperature setting.
Refer to "Temperature
Controllers" on page 27.
When the
(up button) is pressed and the temperature
setting is increased, the voice prompt will sound;
"hot water temperature has been increased"
When the BATH FILL TEMPERATURE
decreased, the voice prompt will sound;
"hot water temperature has been decreased"
The selected temperature setting will be displayed in the temperature display panel and will be
displayed on all Deluxe controllers.
The temperature display panel will go blank 3 seconds after the last press of either of the bath fill
temperature adjustment buttons.
The bath fill temperature setting will be remembered when the BATH FILL button is pressed "on".
Bathroom Deluxe
VOLUME and
BATH FILL TEMPERATURE
of either the
(up button) or the BATH FILL
(down button) will bring up the
press of the
(up button) or
(down button) will change the
Adjustment
BATH FILL TEMPERATURE
1 2 0
BATH (l)
BATH FILL
VOLUME
B1
1.
Bath Fill
BATH FILL
Bath
Water
Volume
Set Bath Fill Water Volume
and Temperature
Hot Water
1 2 0
BATH FILL
BATH (l)
BATH FILL
BATH FILL
B1
1.
Bath Fill
Bath
Water
Volume
– Deluxe
Set Bath Fill Water Volume
and Temperature
Hot Water
(down button) is pressed and the temperature setting is
34
ACTIVE
°C
4 0
BATH FILL ON/OFF
BATH FILL
TEMPERATURE
Rheem
2. 3. 5. 7.
Bath Fill
completed
Bath
BATH FILL BATH FILL
Fill Press Bath (automatic) Press Bath
Temp
Fill Button Bath Fill Button Fill Button
(Red light flashes)
(Red light on) (R ed light off)
4. Open hot tap 6. Close hot tap
1. 2. 3. 4.
ACTIVE Adjust Open hot
ON/OFF Light on Temperature tap
Press
ACTIVE
°C
4 0
BATH FILL ON/OFF
"hot water
temperature
BATH FILL BATH FILL
has been
VOLUME TEMPERATURE
Rheem increased"
"hot water
temperature
2. 3. 5. 7.
Bath Fill
has been
completed
Bath
BATH FILL BATH FILL
Fill Press Bath (automatic) Press Bath
Temp
Bath Fill Button decreased"
Fill Button Fill Button
(Red light on) (Red light flashes) ed light off)
(R
4. Open hot tap 6. Close hot tap
1. 2. 3. 4.
ACTIVE Adjust Open hot
ON/OFF
Light on Temperature tap
Press
or