Rheem 871 Series Owner's Manual And Installation Instructions page 25

Continuous flow gas water heater
Table of Contents

Advertisement

Adjusting the Volume of the Voice Prompt and Operating Tone
The volume of the voice prompt and the operating tone can be adjusted to a level comfortable for you. The
volume of the voice prompt and the operating tone can be adjusted independently of each other. The volume
levels on a Deluxe controller are adjusted independently of another Deluxe controller.
The voice prompt and / or operating tone can also be turned off on an individual or all Deluxe controllers so
they do not sound at all.
The factory default volume setting of both the voice prompt and operating tone is medium [med]. If there is
an interruption to the water heater power supply, the volume of both the voice prompt and operating tone
returns to the default setting.
When adjusting the volume levels, the operating tone volume level is indicated by a chime, followed by the
voice prompt volume level which is indicated by two beeps. If during the volume setting procedure only the
chime is audible, this indicates the voice prompt is off. If during the volume setting procedure only the two
beeps is audible, this indicates the operating tone is off.
To adjust or turn off the volume for the voice prompt and operating tone:
Turn off all Deluxe controllers.
Press and hold the up ( ) button, then within four (4) seconds press the ON / OFF button.
Each press of the ON / OFF button will change the voice prompt and operating tone in the following
sequence:
operating tone [MAX], voice prompt [OFF]
operating tone [MIN], voice prompt [MIN]
operating tone [MIN], voice prompt [OFF]
operating tone [OFF], voice prompt [OFF]
operating tone [MAX], voice prompt [MAX]
operating tone [MED], voice prompt [OFF]
operating tone [MED], voice prompt [MED]
This order then repeats.
Note: If the ON / OFF button is not pressed within four (4) seconds of the up ( ) button being pressed,
"CL" will start flashing on the temperature display panel. If this occurs, release the up ( ) button and
recommence the procedure.
ASSISTANCE CALL FUNCTION
A Deluxe controller has an assistance call button. Should assistance be required, such as when in the
bathroom, a voice prompt will sound on all Deluxe controllers to notify others that assistance is required.
The Deluxe controller does not have to be on for the assistance call function to be activated and the function
can be activated during any operation.
To Call for Assistance
To operate the assistance call function:
Press the green assistance call button.
1.
The voice prompt will sound on all Deluxe controllers,
"assistance required, assistance required"
The red light in the assistance call button will glow on all
Deluxe controllers for the duration of the voice prompt.
TEMPERATURE CONTROL – DELUXE
BATH (l)
BATH (l)
25
ACTIVE
°C
8 8  
BATH FILL 
ON/OFF
ACTIVE
°C
8 8  
BATH FILL 
ON/OFF
"assistance required,
assistance required"

Advertisement

Table of Contents
loading

Table of Contents