To operate a Bathroom Deluxe controller:
1.
Turn off the Kitchen Deluxe controller
If a temperature setting is displayed and the ACTIVE
and ON / OFF operating lights are not glowing, it is
advised to turn off the Kitchen Deluxe controller.
Refer to the notes on the
controllers
on page 30.
Turn on the Bathroom Deluxe controller
2.
Press the ON / OFF button.
The light in the ON / OFF button and the ACTIVE
light will both glow.
The temperature setting of 40°C will be displayed.
Select the temperature setting
3.
Press the up ( ) button or down ( ) button.
When the up ( ) button is pressed, the voice
prompt will sound;
"hot water temperature has been increased"
When the down ( ) button is pressed, the voice
prompt will sound;
"hot water temperature has been decreased"
Refer
to
"Temperature
Controllers"
on page 27.
The selected temperature setting will be displayed
on all Deluxe controllers.
Open the hot tap
4.
The operating light will glow on all Deluxe controllers.
5.
Close the hot tap
The operating light will go out on all Deluxe controllers, if
no other hot tap is open.
It is advised not to turn off the Bathroom Deluxe
controller(s).
Refer to the
warning
Bathroom Deluxe
Adjustment
–
in the notes on page 30.
31
TEMPERATURE CONTROL – DELUXE
Deluxe
ACTIVE
°C
8 8 8 8
5 5
BATH (l)
BATH FILL
ON/OFF
ACTIVE
°C
8 8 8 8
4 0
BATH (l)
BATH FILL
ON/OFF
ACTIVE
°C
8 8 8 8
4 2
BATH (l)
BATH FILL
ON/OFF
"hot water temperature
has been increased",
or
"hot water temperature
has been decreased"
ACTIVE
°C
8 8 8 8
4 2
BATH (l)
BATH FILL
ON/OFF
ACTIVE
°C
8 8 8 8
4 2
BATH (l)
BATH FILL
ON/OFF