Table of Contents
Advertisement
Modifying Recorded Phrases (Phrase Settings)
Creating Combinations of
Phrases (Phrase Combination)
You can create new phrases by combining a number of
phrases already recorded and storing the result as a different
phrase. There are two types of methods for creating phrase
combinations: pattern phrases and song phrases.
To check phrases during various settings, you can play back
and stop phrases using the PLAY and STOP buttons (audio
phrases or MIDI phrases). Note that you cannot change
settings during phrase playback. → (p. 54)
If a card in AR-2000 format is inserted in either slot A or B (or
both), the AR-3000R can be used only for playback, and it is
not possible to record phrases or make any settings (except
for card conversion). Also, if you insert a card in AR-2000
format into slot A or B (or both) while making settings
(except for card conversion), operation will halt with an error
message, and cannot be resumed until such cards are
removed. To record or edit cards in AR-2000 format on the
AR-3000R, follow the steps in "Card Convert" (p. 78).
Combinations of Phrase Units
(Pattern Phrases)
You can combine a number of phrases to create a new phrase
(pattern phrase). A pattern phrase is a stored combination of
phrases that have already been recorded. A pattern phrase is
also treated as a single phrase.
Creating pattern phrases makes it possible to create and start
a variety of combined-phrase patterns while saving card
memory space.
Specific Examples
First, make actual recordings of three phrases like the ones
described below.
A0001: "Thank you for coming"
A0002: "Today"
A0003: "Despite the bad weather"
Combine these three to create a pattern phrase.
62
fig.11-09e
Actual phrase A0001
Thank you for coming
Actual phrase A0002
Today
Actual phrase A0003
Despite the bad weather
Pattern Phrase A0004
A0001 A0002
Pattern Phrase A0005
A0001 A0002 A0003
A0004: "Thank you for coming today" (for sunny days)
A0005: "Thank you for coming today, despite the bad
weather." (for rainy days)
Set A0004 or A0005 to start on playback.
Phrases 0001 through 0005 are used, but the phrases actually
recorded (the actual phrases) are only 0001, 0002, and 0003.
● You can assign up to 100 phrases to a single pattern phrase.
● You can set the phrase playback sequence (pattern phrase
mode) to SEQ or to RANDOM 1, 2, or 3.
About Pattern Phrase Playback Methods (Pattern Phrase
Modes) → p. 63
● The playback volume level for phrases is set at 100% of the
volume level when recorded. (The overall volume level for
each pattern phrase is set with phrase information 1.1 Play
Volume.)
* This setting cannot be made for MIDI phrases.
● The interval sets the time between playback of one phrase
and the next phrase.
fig.11-10e
Pattern Phrase A0010
A0007
A0008
A0006
Volume (%)
Playback volume for the entire pattern phrase (A0010)
(Phrase Information 1.1 Play Volume)
Phrase
: Single
Pattern Phrase
:
A0009
Interval (time)
Advertisement
Table of Contents
