Table of Contents
Advertisement
Modifying Recorded Phrases (Phrase Settings)
7. Turn the SELECT dial to choose the beginning phrase for
the write destination, then press the dial.
fig.11-g51e
* Only phrases that can be executed are displayed.
8. When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose "NO," then press the ENTER button.
Once the settings have been successfully modified, you're
returned to the setting item selection screen.
9. Press the MODE button.
This ends the setting process and returns you to the usual
screen.
●
When "STEREO → MONO 1, 2" Is Selected
5. Turn the SELECT dial to choose the card containing the
stereo phrase you want to convert, then press the dial.
fig.11-g52e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the stereo phrase to convert,
then press the dial.
* Only phrases that can be executed are displayed.
6. Turn the SELECT dial to choose the card for write
destination 1 (MONO1), then press the dial.
fig.11-g53e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the phrase for write
destination 1, then press the dial.
* Only phrases that can be executed are displayed.
7. Turn the SELECT dial to choose the card for write
destination 2 (MONO2), then press the dial.
fig.11-g54e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the phrase for write
destination 2, then press the dial.
* Only phrases that can be executed are displayed.
74
8. When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose "NO," then press the ENTER button.
Once the settings have been successfully modified, you're
returned to the setting item selection screen.
9. Press the MODE button.
This ends the setting process and returns you to the usual
screen.
●
When "MONO 1, 2 → STEREO" Is Selected
5. Turn the SELECT dial to choose the card containing the
first mono phrase 1 (MONO1) you want to convert, then
press the dial.
fig.11-g55e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the first mono phrase 1 to
convert, then press the dial.
* Only phrases that can be executed are displayed.
6. Turn the SELECT dial to choose the card containing the
second mono phrase 2 (MONO2) you want to convert,
then press the dial.
fig.11-g56e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the second mono phrase 2 to
convert, then press the dial.
* Only phrases that can be executed are displayed.
7. Turn the SELECT dial to choose the write-destination
card, then press the dial.
fig.11-g57e
* If a card is inserted into either slot A or slot B, the entry
location (highlighted) advances to the phrase number.
Turn the SELECT dial to choose the write-destination phrase,
then press the dial.
* Only phrases that can be executed are displayed.
8. When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose "NO," then press the ENTER button.
Advertisement
Table of Contents
