Table of Contents
Advertisement
Although you can select phrases from Card A as well as Card
B, note that playback will not work properly if the card
inserted when the phrase was registered is not inserted at
playback. (If the phrase is not saved, the playback signal is
ignored).
Settings When Formatting Cards (in Slot A)
fig.16-03e
Program Change 1
Note
Number
C-1
C#-1
D-1
:
G9
MIDI Note Map (Phrase Assignments from
Program Changes and Note Numbers)
fig.16-04e
Program
Phrase No.
Note No.
Change
1
C-1 – G9
You can assign 128 phrases
however you like.
21
C-1 – D#7
A0001 – A0100
22
C-1 – D#7
A0101 – A0200
23
C-1 – D#7
A0201 – A0300
24
C-1 – D#7
A0301 – A0400
25
C-1 – D#7
A0401 – A0500
26
C-1 – D#7
A0501 – A0600
27
C-1 – D#7
A0601 – A0700
28
C-1 – D#7
A0701 – A0800
29
C-1 – D#7
A0801 – A0900
30
C-1 – D#7
A0901 – A1000
71
C-1 – D#7
B0001 – B0100
72
C-1 – D#7
B0101 – B0200
73
C-1 – D#7
B0201 – B0300
74
C-1 – D#7
B0301 – B0400
75
C-1 – D#7
B0401 – B0500
76
C-1 – D#7
B0501 – B0600
77
C-1 – D#7
B0601 – B0700
78
C-1 – D#7
B0701 – B0800
79
C-1 – D#7
B0801 – B0900
80
C-1 – D#7
B0901 – B1000
2
C-1 – D#7
A0001 – A0100
3
C-1 – D#7
A0101 – A0200
4
C-1 – D#7
A0201 – A0300
5
C-1 – D#7
A0301 – A0400
6
C-1 – D#7
A0401 – A0500
7
C-1 – D#7
B0001 – B0100
8
C-1 – D#7
B0101 – B0200
9
C-1 – D#7
B0201 – B0300
10
C-1 – D#7
B0301 – B0400
11
C-1 – D#7
B0401 – B0500
128
C-1 – G9
The phrase being plaued back
is stopped.
<Program Change
1>
C-1 C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 G9
12
12
12
12
12
12
12
128 phrase all
<Program Change
21–30, 71–80, 2–11>
C-1 C0 C1 C2 C3 C4 C5 C6 C7 D#7
12
12
12
12
12
12
12
100 phrase all
Controlling the AR-3000R Using MIDI Signals (MIDI Control)
Phrase
A0001
A0002
A0003
:
A0128
12
12
12
8
12
4
* The 1,000 phrases on card A are assigned to Program Changes
21 through 30, and the phrase assignments cannot be changed.
* The 1,000 phrases on card B are assigned to Program Changes
71 through 80, and the phrase assignments cannot be changed.
* For compatibility with the AR-2000 format, 500 phrases on
card A and 500 phrases on card B are assigned to Program
Changes 2 through 6, and 7 through 11, and the phrase
assignments cannot be changed.
* With Program Change 128, playback of the phrase in progress
is stopped by switching any note number on.
Procedure for Making the MIDI Note Map
Settings
1. Press the MODE button.
The MODE indicator lights up.
2. Use the SELECT dial to choose "6.2 MIDI Note Map,"
then press the dial.
3. Turn the SELECT dial to choose the note number you
want to set, then press the dial.
fig.16-g02e
• C-1 through G9: Note number
• End: To finish making settings.
• Reset: This restores the settings at the time the card was
formatted.
• Clear: This erases all settings.
4. Turn the SELECT dial to choose the card containing the
phrase you want to store, then press the dial.
fig.16-g03e
5. Turn the SELECT dial to choose the phrase you want to
store, then press the dial.
6. Repeat steps 3 and 4 to assign phrases.
7. To cancel the save process, then in step 3, turn the
SELECT dial to choose END, then press the dial.
fig.16-g04e
8. When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose "NO," then press the ENTER button.
Once the settings have been successfully modified, you're
returned to the setting item selection screen.
107
Advertisement
Table of Contents
