Roland AR-3000R Owner's Manual page 63

● You can assign a phrase any number of times to a single
pattern phrase, or to more than one pattern phrase.
● You can assign pattern phrases that have already been
created to other pattern phrases.
fig.11-11e
Pattern Phrase
A0011 A0013
A0017 A0018 A0019
Pattern Phrase Pattern Phrase
A0012
* When a hierarchy of two or more levels of pattern phrases is
assigned, playback may not be correct.
fig.11-11ae
Pattern Phrase
A0011 A0013
A0017 A0018 A0019
Pattern Phrase Pattern Phrase
A0012
Phrase
: Single
Pattern Phrase
:
● You can also assign MIDI phrases to pattern phrases.
● You can assign a mixture of audio phrases and MIDI
phrases.
● Song phrases that have already been created (p. 65) cannot
be assigned to pattern phrases.
"Playback Volume", "Playback Point" and "Fade settings"
included in the phrase information for phrases assigned to a
pattern phrase remain in effect, but other phrase information
is disregarded. Because the volume level set for a phrase
alone is disregarded, to adjust the volume, adjust the volume
setting for the pattern phrase.
• When you are creating a pattern phrase, you can choose
actual phrases from both card A and card B, but note
that the pattern phrase is not played back correctly if the
card containing the constituent phrase is not inserted at
the time of playback. (If a constituent phrase does not
exist, the unit seeks and plays back the next phrase.)
Modifying Recorded Phrases (Phrase Settings)
A0025
A0015 A0016
A0020 A0021
A0014
Phrase
: Single
Pattern Phrase
:
A0025
A0015 A0016
A0020
A0014
A0017 A0018
Pattern Phrase
A0019
About Pattern Phrase Playback Methods
(Pattern Phrase Modes)
There are four types of pattern-phrase playback methods
(pattern phrase modes), which are described below. Choose
the one that matches your usage conditions.
SEQ: This plays back the phrases in the sequence in which
they were assigned.
RANDOM1: This plays back the phrases assigned to No. 001
through No. 100 at random.
RANDOM2: This plays back the phrases assigned to No. 001
through No. 100 at random, while allowing you to insert
another phrase once at a set number of times (interrupt
phrase interval of 1 to 25). The interrupt phrase is selected
sequentially from phrases No. 101 through 128.
RANDOM3: This plays back the phrases assigned to No. 001
through No. 100 at random, while allowing you to insert
another phrase once at a set number of times (interrupt
phrase interval of 1 to 25). The interrupt phrase is selected
randomly from phrases No. 101 through 128.
Assign only audio phrases to Nos. 101 through 128.
fig.11-12e
SEQ
No.001–No.100
Playback in stored sequence
RANDOM1
No.001–No.100
Random playback
RANDOM2
No.001–No.100
Random playback
Interrupted once per specified number of times
RANDOM3
No.001–No.100
Random playback
Interrupted once per specified number of times
* With random playback, once a phrase has been played back it is
not chosen again.
Procedure for Creating a Pattern Phrase
1. Press the MODE button.
The MODE indicator lights up.
2. Use the SELECT dial to choose "2.1 Pattern Phrase," then
press the dial.
No.101–No.128
in stored sequence
No.101–No.128
in random
63