Table of Contents
Advertisement
WARNING: THE FRYER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING,
CLEANING OR SERVICING THE FRYER.
WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE
THE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK.
CONTROLS - MODEL VF1 (Fig. 1)
Power Switch
ON Indicator Light
HEAT Indicator Light
Thermostat
Fry/Melt Switch
Automatic Basket
Lift Timers (Optional)
Ball Pull Rod
Power Switch
CONTROLS - MODEL VF1D (Fig. 2)
ON INDICATOR LIGHT –
INDICATES UNIT ELECTRICAL
POWER IS "ON".
POWER SWITCH –
PRESS TO TURN
FRYER ELECTRIC
POWER "ON" OR
"OFF".
HEAT INDICATOR LIGHT –
WHEN ON, INDICATES HEATING ELEMENTS
ARE SUPPLYING HEAT TO THE FRYER.
OPERATION
-
Turns electric power to the fryer on or off.
-
(RED) Indicates electric power to the fryer is on.
-
(AMBER) Indicates the heating elements are supplying heat.
-
Controls the temperature of the oil in the tank.
Temperature range is from 0 - 400 F (-18 to 204 C).
-
(Optional - Not Shown) Position on MELT when solid shortening is
being melted; then position on FRY for normal operation.
-
Set to desired frying cycle time. At end of the set time, baskets will
raise. Timer range is from 0 - 15 minutes.
-
Raises elements from the tank when pulled straight out. Lowers
elements into the tank when pushed in.
On Indicator
Thermostat
Light
Automatic Basket Lift Timers (optional)
Fig. 1
THERMOSTAT –
CONTROLS OIL TEMPERATURE (0 - 375°F).
FRY/MELT SWITCH –
PRESS FRY TO OPERATE IN FRY MODE.
PRESS MELT TO OPERATE IN FAT MELT MODE.
Fig. 2
– 6 –
Heat Indicator
Light
HIGH LIMIT INDICATOR LIGHT –
WHEN LIT, INDICATES THE
HI LIMIT SAFTEY HAS BEEN TRIPPED.
BALL PULL ROD –
RAISES AND LOWERS
HEATING ELEMENT
FROM TANK
Ball Pull Rod
PL-40539-1
PL-41436-1
Hide quick links:
Advertisement
Table of Contents
