Intermec EasyCoder F2 Installation & Operation Manual page 21

Bar code label printer ipl version

Hide thumbs Also See for EasyCoder F2:

Table of Contents

Chapter 5 Ribbon Load

Tear-Off, cont.

Remove any empty core from the media

supply roll post.

Route the media through the print mechanism.

Then push it inwards as far as it will go.

Fit a new roll of media on the supply post and

adjust the edge guide so the roll becomes ﬂ ush

This diagram shows the media path.

Intermec EasyCoder F2 – Installation & Operation IPL Version, Ed. 1

with the center section.

Table of Contents