Memory
This section presents memory module (DIMM) configuration information and removal/installation
procedures.
Supported DIMM configurations
The computer supports these DIMM configurations:
Four DIMM slots
●
Memory configuration from 1 GB to 16GB
●
No support for mirroring
●
No support for DIMM sparing
●
Error checking and correcting (ECC) and non-ECC DIMMs are supported.
●
DIMM installation guidelines
Install only HP-approved DDR3 DIMMs
●
CAUTION:
computer. Because third-party DIMMs might not be electrically or thermally compatible, they are
not supported by HP.
For ECC DIMMs, use only industry-standard ECC unbuffered DIMMs. See
●
go/quickspecs
Do not intermix non-ECC memory DIMMs with ECC memory DIMMs.
●
DIMM installation order
The numbers in the following figure show the correct installation order for DIMMs.
Figure 5-66
118
Chapter 5 Replacing components
HP ships only DIMMs that are electrically and thermally compatible with this
to find which DIMMs are compatible with the computer.
DIMM load order
http://www.hp.com/
ENWW