Using The Small Form Factor Computer In A Tower Orientation - HP Z200 Maintenance And Service Manual

Table 5-7
Item
P3
P4

Using the Small Form Factor Computer in a Tower Orientation

The Small Form Factor computer can be used in a tower orientation. The HP logo plate on the front
bezel is adjustable for either desktop or tower orientation.
1.
Follow the procedures listed in the
CAUTION:
data loss.
2. Orient the computer so that its right side (as seen from the front) is facing down and place the
computer in the optional stand.
NOTE:
tower stand.
Figure 5-54
3. Restore all connections and equipment that you removed during the
on page
NOTE:
free of obstructions.
108 Chapter 5 Replacing components
Power connector description (continued)
Description
CPU power
Hard disk drive
Failure to follow the predisassembly procedures can result in equipment damage or
To stabilize the computer in a tower orientation, HP recommends the use of the optional
Changing from desktop to tower orientation
69.
Ensure at least 10.2 cm (4 in) of space on all sides of the computer remains clear and
Item Description
P7 SATA PWR1 (P160 on
system board) for optical
disk or hard disk drives
Predisassembly procedures on page 69 section.
Predisassembly procedures
ENWW