Cisco DPC2203C Installation And Operation Manual page 86

Appendix A
Specifications
Voice Specifications
Call Feature Support
Telephone Ring Loading
Ring Signal
Max phone line distance
Country specific telephone
parameters supported
High Speed Data
Simultaneous Access
Cable Modem Access Protection Software-based standby feature disables bridging to the
Max CPE
RF Downstream
Frequency Range
Demodulation
Maximum Data Rate
70
Caller ID

Call Waiting with Caller ID

Call Conferencing (3-way calls)

Configurable hook flash support

Distinctive ringing (Configurable for up to 11 ring

patterns per phone line)
Ring splash

Stutter dial tone

Off hook warning tone

Open Switch Interval support to enhance answering

machine compatibility
Other call features available with compliant CMS or

gateway
Full 5 REN support on each phone line (10 REN total)
Configurable balanced ring with optional DC offset
Supports up to 1000 ft of AWG26 wire (0.4mm) on each
phone line. Supports operation with typical in-home
telephone wiring
United States, Japan, United Kingdom, Germany, France,
Belgium, Netherlands, Finland, Italy, Switzerland,
Sweden, Denmark, Brazil, ETSI 101-909-18
Bridged Ethernet and USB data ports
WAN when enabled
Configurable up to 64 CPE devices
(1 USB and 63 Ethernet)
88 to 860 MHz
64 QAM or 256 QAM
30 Mbps for 64 QAM

43 Mbps for 256 QAM

72-4017315-01 Rev B