Registration Not Complete - Cisco DPC2203C Installation And Operation Manual

Registration Not Complete

Description
In this phase, the cable modem requests the time of day and the configuration file for
the cable modem. The configuration file contains operational parameters for how the
user wants the cable modem to operate on the system. If the cable modem receives
an invalid configuration file, it may not be able to complete the registration process.
Depending on the type of error received, the cable modem may try to immediately
sign on again or resume the downstream scan. After the cable modem completes the
transfer operational parameters stage, the cable modem is able to register with the
CMTS.
Note: The CMTS may reject the registration of the cable modem, or the CMTS may
be unable to provide certain services requested by the cable modem.
The following table illustrates the status of the front-panel LED status indicators
when the registration not complete condition exists.
LED
1
2
3
4
5
6
7
8
72-4017315-01 Rev B
Label
POWER
DS
US
ONLINE
LINK
TEL 1
TEL 2
BATTERY
Status
ON
ON
ON
BLINKING
OFF if not connected to CPE

ON or BLINKING if connected to CPE

OFF
OFF
ON WHEN BATTERY IS CHARGED

BLINKING WHEN BATTERY CHARGE IS LOW

OFF WHEN BATTERY NEEDS TO BE REPLACED (IF

OBSERVED WITH AC POWER APPLIED TO THE MODEM)

Registration Not Complete

49